Since, the problem with Epson error code 0x97 has been rising, the expert teams of engineers have come up with workarounds for this problem but the permanent solution unfortunately is to repair the old printer or replace it with a new one. Some methods to fix this involve, plugging in and unplugging your device in a direct as well as reverse way, updating all the drivers and cleaning the clogged printer nozzles.
How to fix Epson error code 0x97 ?
Epson error code 0x97 is a common issue that can occur in various Epson printer models. Here are some steps you can follow to fix the error:
Restart the printer: Turn off the printer and unplug it from the power source. Wait for a few minutes and then plug it back in and turn it on.
Clean the printer: Open the printer cover and check for any dust or debris that may be causing the error. Use a soft cloth or brush to clean the printer and remove any debris.
Check the ink cartridges: Make sure the ink cartridges are installed correctly and are not empty or low on ink. Replace any empty or low cartridges with new ones.
Update the printer drivers: Visit the Epson website and download the latest printer drivers for your printer model. Install the drivers and restart the printer.
Reset the printer: Press and hold the power button on the printer for 1 minute to reset it. Then release the button and turn on the printer.
Contact Epson customer support: If none of these steps work, you can contact Epson customer support for further assistance. They may be able to provide additional troubleshooting steps or recommend a repair or replacement if needed.
By following these steps, you should be able to fix the Epson error code 0x97 and get your printer working again.
Regards,
Will